1. THÔNG BÁO TUYỂN ADMIN DIỄN ĐÀN 2013
    Tìm kiếm nhà trọ - Ở ghép
    THÔNG BÁO BÁN ÁO SPKT.NET CHO THÀNH VIÊN DIỄN ĐÀN


    HÃY TÌM KIẾM Ở ĐÂY TRƯỚC KHI ĐẶT CÂU HỎI
    {xen:phrase loading}

Tiny PLC

Thảo luận trong 'PLC - Biến tần - Truyền thông CN' bắt đầu bởi KN Servant., 15 Tháng năm 2009.

  1. KN Servant. Servant.

    Số bài viết: 1,291
    Đã được thích: 3
    Điểm thành tích: 0
    Ai biết về TinyPLC thì xin chỉ dùm.
    Ai muốn nghiên cứu về phát triển về PLC sử dụng trong trường học
    Yêu cầu chương trình đơn giản như Lad không phức tạp như microcontroller. Tích hợp các cổng I/O và điều khiển như PLC nhưng giá rẻ hơn. Nó là kết hợp của PLC và Microcontroller
    [IMG]
    [IMG]
  2. KN Servant. Servant.

    Số bài viết: 1,291
    Đã được thích: 3
    Điểm thành tích: 0
    Re: Tpc37

    Sao KHT mà không ai trả lời hết ta.
    Có ai biết thì chỉ dùm với
    Không thì viết phản hồi cũng được
  3. huyen New Member

    Số bài viết: 148
    Đã được thích: 0
    Điểm thành tích: 0
  4. KN Servant. Servant.

    Số bài viết: 1,291
    Đã được thích: 3
    Điểm thành tích: 0
    Re: Tpc37

    Uhm. Mình nghỉ chúng ta cần có hướng nghiên cứu đồ án là vừa rồi. CDT thì phải đi trước chứ. Cám ơn vì đã có ý kiến.
    Thanks a lot
    Huyền nhớ dụ gỏ dấu nha. Không thui bị phạt đó. HI HI
  5. khoahoctre Giảng Viên

    Số bài viết: 451
    Đã được thích: 7
    Điểm thành tích: 16
    Re: Tpc37

    Bên trong thiết bị của các bạn đưa nó chính là 1 vdk ATMEGA128 đã được nhúng chương trình của hãng, lập trình trên ngôn ngữ ladder của PLC hoặc C, basic, rất dễ lập trình . Giá 1 module xử lý khoảng 50$, kỳ này có bạn sinh viên Nguyễn Bá Tân đang làm về cái này , bạn nào muốn tìm hiểu hoặc mua thiết bị có thể liên hệ Tân nick : batan2810
  6. KN Servant. Servant.

    Số bài viết: 1,291
    Đã được thích: 3
    Điểm thành tích: 0
    Re: Tpc37

    Cám ơn thầy nhiều. Thế là có người để hỏi rùi
  7. minhhung_spk New Member

    Số bài viết: 24
    Đã được thích: 0
    Điểm thành tích: 1
    Re: Tpc37

    Mấy bồ có thể nói mình biết một vài ứng dụng của TinyPLC được không.
    Khóa trước có ai làm về phần này chưa vậy.Sao tớ thấy còn mới wa.:pitiful:
  8. KN Servant. Servant.

    Số bài viết: 1,291
    Đã được thích: 3
    Điểm thành tích: 0
    Re: Tpc37

    Thông tin mới về TPC37
    Chúng ta có thể làm như mô hình. TPC37 thực ra có thể xem nó là CPU của PLC. Chúng ta phải làm thêm các I\O, nguồn và cổng giao tiếp
    [IMG]

    Kết quả chúng ta có

    [IMG]
  9. huyen New Member

    Số bài viết: 148
    Đã được thích: 0
    Điểm thành tích: 0
    Re: Tpc37

    cám ơn Tân về cac huong nghien cứu nhé.nếu con cái nào nữa thi pót len lun ha.thanks:001:
  10. KN Servant. Servant.

    Số bài viết: 1,291
    Đã được thích: 3
    Điểm thành tích: 0
  11. KN Servant. Servant.

    Số bài viết: 1,291
    Đã được thích: 3
    Điểm thành tích: 0
  12. KN Servant. Servant.

    Số bài viết: 1,291
    Đã được thích: 3
    Điểm thành tích: 0
    Mới tìm được bài mới đây

    [IMG]

    What's CUBLOC

    CUBLOC is different from the traditional PLCs that the users may associate with.Traditional PLCs have cases and connections like picture below but CUBLOC is an “On-Chip” PLC / Embedded Computer, meaning you have more freedom and flexibility to the final product size and design.
    CUBLOC Modules are similar to traditional PLCs in that LADDER LOGIC can be used but its small size allows developers to design custom PCBs just like a microcontroller.

    [IMG]
    There are different models each with a unique program memory size, number of I/O ports. Please make a selection based on your product’s requirement.
    [FONT=바탕][IMG][/FONT]



    Model


    CB220


    CB280


    CB290


    Program Memory


    80KB


    80KB


    80KB


    I/O Ports


    16


    49


    92


    Data Memory


    3K


    3K


    28K


    Other Features






    RTC




    CUBLOC’s advantage over other PLCs is that it supports LADDER LOGIC’s weaknesses with BASIC language.LADDER LOGIC is good enough to replace sequence diagrams but to collect data, print graphics, and do more complex tasks is asking a little bit too much.That is why we added the BASIC language.You can now run both LADDER LOGIC and BASIC!
    Another advantage over other BASIC processors is that CUBLOC is able to separate the amount of work and programming between LADDER LOGIC and BASIC if the user desires to.

    [IMG]
    [IMG]
    Picture of CUBLOC Studio is shown above.

    There are PLCs on the market currently that supports both LADDER and BASIC.But these PLCs do not multi-task and run “Single-task.”Meaning BASIC is part of LADDER and does not run independently like CUBLOC.This can prove to be costly since BASIC is not real-time oriented and can effect LADDER part of the program.CUBLOC is able to cover these weaknesses through its multi-tasking features, guaranteeing accuracy and precision of timing.Unlike many BASIC processors on the market today, CUBLOC supports real-time processing and multi-tasking.

    CUBLOC has a multi-tasking structure that runs BASIC and LADDER simultaneously that allows accurate LADDER scan timing and still processing BASIC.You even have a choice of simply using BASIC or LADDER by itself.

    [IMG]
    As you can see, CUBLOC is a brand new type of PLC/Micro-computer.By being able to do things that traditional PLCs couldn’t through BASIC language, we have expanded the horizons of both PLCs and BASIC micro-computers.

    LADDER LOGIC and BASIC

    The biggest advantage of LADDER LOGIC is that all circuits are processed in “Parallel,” meaning they are all processed at the same time.

    [IMG]
    As you can see above, both A and B circuits are in a waiting state, ready to output once inputted.
    In comparison, BASIC processes code in order, a type of “Sequential Processing.”

    [IMG]


    These 2 types of programming have been used in different fields for a long time.LADDER LOGIC is used in automation controllers such as PLCs.On the other hand, BASIC and other programming languages such as C and Assembly have been used in PCs and MCUs.
    The biggest advantage that LADDER LOGIC possesses is the ability to process input within a guaranteed slot of time.No matter how complex the circuit becomes, LADDER LOGIC is always ready to output when it receives input.This is the main reason why it’s used for machine control and other automation fields.
    LADDER LOGIC is more logic oriented, not a complete programming language.To do complex processes, it has its limits.For example, to receive input from a keypad, display to 7 Segment or LCD, and process user’s input is a daring task for LADDER LOGIC.
    But these things are rarely a problem for programming languages such as BASIC.BASIC is able to process floating point numbers, data communications, and other things beyond the scope of what LADDER LOGIC can do alone.Another advantage that BASIC has is that its language is very similar to the English language (IF, GOTO, etc…), allowing the beginners and the developers to learn in matter of hours, instead having to deal with days or months of learning curve.

    LADDER LOGIC
    Programming Languages (BASIC,C,ASM)
    Device
    PLC
    PC or Micro-Computer
    Application
    Automation, Machine-Control
    General Computing
    Advantages
    Sequencer, Bit Logic, Timers, Counters
    Complex Math, Data Communication, Data Collection & Process, Analysis, Graphic Interface
    Basic Mechanism
    Parallel
    Sequential
    LADDER LOGIC’s parallelism and BASIC sequential language both have its advantages over each other.LADDER LOGIC is able to process what couldn’t be done with BASIC.On the other hand, BASIC is able to process easily what either couldn’t be done or is very hard to do with LADDER LOGIC.
    That is why we created “CUBLOC,” which the user is free to use both LADDER LOGIC and/or BASIC based on the application being created.After understanding the advantages of LADDER LOGIC and BASIC, the user will be able to create more efficient final products while saving development time and costs.

    Multi-tasking og LADDER and BASIC

    There are many ways to implement both BASIC and LADDER in one processor.The current products on the market use BASIC as part of LADDER LOGIC.These products support BASIC and LADDER LOGIC but there is one clear weakness.

    [IMG]
    The first weakness is that based on the execution time of BASIC, LADDER LOGIC also gets affected.If the BASIC code is made up of an infinite loop, LADDER LOGIC will also stop.LADDER LOGIC’s main advantage is that it can process input in a guaranteed scan-time.If LADDER LOGIC cannot process within this guaranteed scan-time because of BASIC, it might be better to not include BASIC capabilities.
    The second weakness is that BASIC can only be used as part of LADDER LOGIC.BASIC is a powerful language by being able to process complex algorithms.But if we can only use BASIC as part of LADDER LOGIC, we are not fully using BASIC to its maximum performance.
    The third point has to do with I/Os.BASIC language’s execution of I/Os can create unwanted collisions with LADDER.The reason is that LADDER LOGIC I/Os are updated while in BASIC, I/Os are directly accessed.
    After solving these problems, we have created a BASIC and LADDER LOGIC processor that supports real-time “multi-tasking.”BASIC runs BASIC and LADDER runs LADDER, simultaneously without causing collision between the each other.

    With just BASIC, you will be able to create many devices.In comparison to other BASIC processor on the market today, CUBLOC’s BASIC clearly has faster processing speed and the upper hand on the main features.If LADDER LOGIC is not necessary, the user may use just BASIC.
    In the case of I/Os, the user can specifically control the I/Os used by BASIC and LADDER, thereby eliminating I/O collision problems.
    CUBLOC uses BASIC as its main language.We recommend controlling LADDER from BASIC.
    For example, there is a MASTER CONTROL feature in LADDER LOGIC, allowing the user to set Control Zones.Control Zones are sections within the LADDER LOGIC that the user can set entire sections of the control circuit.With the MASTER CONTROL feature, the user can enable/disable LADDER LOGIC’s Control Zones easily.

    [IMG]

    In BASIC, the user may read or write to LADDER LOGIC’s data memory.
    In the above example, you can access relay M1 as _M(1) and write to it from BASIC.
    As you can see, CUBLOC supports BASIC and LADDER multi-tasking simultaneously through “data memory sharing.”

    Advantages of "On-Chip"PLC/Embedded Computer

    One of the main advantages of CUBLOC is that it is an “On-Chip” PLC.Normally, we think of PLC as a block type case with input and output lines.When using these PLCs, an external case, and cabinet must be used in addition to other mind-bogging wiring requirements

    [IMG]

    When using just a couple of sets, this might not present a big problem.But when mass-producing such PLCs, labor cost for assembling the PLCs and faulty parts could lead to many problems.Most importantly, the overall design of you final product will be bigger and will cost more to produce.

    [IMG]


    [IMG]

    CUBLOC is an “On-Chip” PLC, allowing easy fit on a PCB.You may use the PLC almost like an MCU.You can design a customized PCB for the desired product which reduces the cost and size of your final product, and most importantly, allow the product to be one-of-a-kind.
    The following table shows differences between a traditional PLC and “On-Chip” PLC/Micro-computer, CUBLOC.

    [IMG]

    If you are currently using a traditional PLC, please review our product and compare the costs if you change it to a PCB type.We believe that you will have much more satisfactory final product at a fractional cost.

    Development Environment
    To use CUBLOC, the user may use a Windows XP, 2000, or 98 operating system equipped computer.If you would like to use it in Linux/Unix/Macintosh environment, you will need to install a virtual machine software of some type (such as VMware, etc…) that allows Windows operating system to run on it.
    An RS232 port is also required or you may use a USB-to-RS232C converter.Download and Monitoring is possible when connected with the PC.

    [IMG]
    When CUBLOC is disconnected from the PC, it goes into a STAND-ALONE state.The main program is stored in CUBLOC’s flash memory, and will be retained even with no power.The user may download new programs and erase them as many times as he or she wishes.

    Download and Monitoring throuch the Internet

    – Manage 1000s of devices over the Internet
    XPORT is an internet module that converts RS232 signals into TCP or UDP packets.You can use XPORT and CUBLOC to download and monitor programs through the internet.
    By using this feature, you will be able to update and provide customer service for your products even if it’s located in other parts of the world.We provide custom XPORT firmware, Downloading/Monitoring Server programs and embeddable applets for downloading and monitoring your CUBLOC module.You may use this program to manage thousands of devices.
    Please refer to our CUBLOC downloads on our homepage for application notes.

    [IMG]


    XPORT internet module



    [IMG]


    Java Downloader/Monitoring Server Program



    [IMG]


    Embedded Java Applet for Downloading/Monitoring


    Hits for traditional PLC User

    For users with much experience in traditional PLCs, they will find BASIC a completely new language. CUBLOC is a PLC with BASIC language capabilities added.The user may program only using the ladder language.
    By having the option of using the BASIC language, even the PLC user may be able to incorporate new features to the final product by making use of BASIC, which has much powerful capability and flexibility in communicating with other devices than PLCs.
    To use CUBLOC, the user does not have to know BASIC.He/She may simply use only LADDER for development.If the user does not require LCD display or keypad usage, he or she does not need to use BASIC at all.
    As you can realize, more emphasis on user interface is becoming apparent in our industrial world.CUBLOC is able to overcome the deficiencies and disadvantages of traditional PLCs by being able to use both BASIC and LADDER language.

    [IMG]

    We provide many BASIC libraries for user interfaces which you can simply copy & paste to achieve the user interface structure desired.


    Hint for Micro Controller (MCU) User

    MCU, Micro Controller Unit, is programmable micro-computers such as PIC, AVR, and 8051.For mass-production, MCUs can cut costs and reduce the overall product size.But the main disadvantage of MCUs is that it is hard to develop and takes a long time.For simple projects, this might be a good route.
    Even those experienced engineers feel that MCU programming is time-consuming and not a simple task.To make a final product, it takes many hours programming and debugging with an MCU.Even after development, if bugs arise, it becomes almost impossible to update the MCU.
    In comparison, Comfile’s CUBLOC will cut the users development time as much as 20 times and provide a MCU-like chip that is upgradeable through RS232 cable or even through the internet by using an XPORT.By being able to provide a way to upgrade the final product, the value of your final product is much more than what you thought.
    If you have experience programming with MCUs, we guarantee you that development of your final product will be much easier.You will be able to spend more time designing the features of your final product, instead of spending hours and hours in front of a computer.Through use of our embedded Java firmware in XPORT, you will be able to enable, monitor, and update your CUBLOC from anywhere in the world.

    CUBLOC's Internal Structure

    [IMG]


    The BASIC interpreter contains a “Flash memory” for user’s BASIC programs. LADDER processor also has a “Flash memory” for user’s LADDER program.I/O ports are shared among BASIC and LADDER, allowing free access to both.

    BASIC data Memory can only be accessed by BASIC interpreter while LADDER data memory can be accessed by both BASIC Interpreter and LADDER Processor.
    BASIC program memory(1) and LADDER(2) share the same Flash Memory. The total available memory space is 80KB.BASIC can use the whole memory or LADDER may use the whole memory.As long as the BASIC and LADDER program total is within 80KB, the user is free to program as he/she wills.(CB2XX series allow 80KB; future models will have more memory)
    I/O ports (5) can be used both by BASIC and LADDER. The user must specify I/O ports to use in LADDER and BASIC.All I/O ports can be used in LADDER or BASIC.

Chia sẻ trang này